News

News

Focusing on developing high-performance and long-lasting cooling fans

The working principle of cooling fan

The working principle of cooling fan

Using the principle of electromagnetic induction, the fan uses the Houle induction module as a synchronous detection device, controls a set of circuits, switches the winding electrification sequence, and generates a rotating magnetic field, a mechatronics engineering fan for electronic commutation. The cooling fan has obvious advantages in the aspects of wide speed range, light weight, environmental protection and energy saving, controllability, reliability, environmental endurance and economy, etc. , dominate. The cooling fan is powered by direct current. The DC motor is composed of stator and rotor. The stator has a magnetic pole (winding type or permanent magnet type) , while the rotor has a winding, after the staff electrified it, the rotor also forms a magnetic field (magnetic pole) , there is an angle between the stator and the rotor magnetic pole, in the stator and rotor magnetic field (N-pole and S-pole) under the mutual attraction, is the motor rotation. The cooling fan technician told us to change the position of the brush, you can change the direction of the rotor-stator magnetic pole angle (starting with the stator's magnetic pole, the rotor's magnetic pole is on the other side, and the direction from the rotor's magnetic pole to the stator's magnetic pole is the direction of the motor's rotation) , after this operation, the rotation direction of the motor can be changed.

18

2023-11

What are the maintenance methods for DC cooling fans?

What are the maintenance methods for DC cooling fans?

Store and maintain in the correct way to extend the service life of the DC cooling fan. The following high-quality fan manufacturers will provide you with detailed maintenance methods for DC cooling fans:

11

2023-04

How to choose the right cooling fan or other cooling fans

How to choose the right cooling fan or other cooling fans

The design engineers of all motor automation equipment and electronic products that require the use of cooling fans for heat dissipation must determine the air volume required for a specific system's heat dissipation

23

2022-09

What is the difference between a DC fan and an AC fan?

What is the difference between a DC fan and an AC fan?

The working principle of a DC cooling fan: It is driven by 4102 DC voltage and electromagnetic induction. 1653 converts electrical energy into machinery to drive the fan blades to rotate, relying on the coil and IC to continuously switch, and the induction magnetic ring drives the fan blades to rotate.

24

2022-08

Bearing - an important component in the cooling fan

Bearing - an important component in the cooling fan

Bearing is an important component in contemporary mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and ensure its rotational accuracy.

13

2022-07

< 12 > proceed page

Contact

Tel: 0769-82856089
Fax: 0769-82856693
Contact: Mr. / 13925528792
Website: www.gdxxdz.cn
Alibaba: http://xiangxindz.1688.com

Address：F3, building a, Baozhou Industrial Zone, Fenggang town, Dongguan City

Scan Follow Consultation

Scan Follow Consultation

Copyright © 2023 Dongguan Xiangxin Electronic Technology Co., Ltd

Business License

 SEO  Yunzixun Support: 300.cn Dongguan